Spotswood 压花玻璃
Spotswood 压花玻璃按尺寸切割，$200/m² 起（6mm），有 4、5 和 6mm。所有厚度都可钢化。输入尺寸后屏幕上即显示准确价格，送货墨尔本、Geelong 内城区和悉尼均已包含在内——最小一块含送货 $149 起。 隐私玻璃并排对比 →
我们按尺寸切割的其他玻璃
Spotswood 是一种线条明显的压花玻璃，在澳洲住宅中很常见，也是客户最常让我们配的更换花纹之一。明显的条纹遮挡效果好，外观有辨识度，略带复古感。
有 4mm、5mm 和 6mm。
Spotswood 价格一览
| 玻璃尺寸 | 4mm | 5mm | 6mm |
|---|---|---|---|
| 450 × 600 mm | $192.80 | $211.30 | $176.30 |
| 600 × 900 mm | $213.82 | $233.80 | $196.00 |
| 600 × 900 mm，钢化 | $239.74 | $252.70 | $212.20 |
| 900 × 1800 mm，钢化 | $574.42 | $613.30 | $491.80 |
价格来自我们的在线计算器，按长方形、抛光边计算，含送货到墨尔本市区和 Geelong 内城区。面积小于 0.5 m² 的按 0.5 m² 计价。价格核对于 2026 年 10 月——请在产品页面输入准确尺寸查看您的价格。
用于浴室窗户、室内门、侧板、楼梯隔断和柜门。因为花纹有方向，下单前请想好线条朝哪个方向。竖线让玻璃显得更高，横线显得更宽；一排玻璃的方向应保持一致。
要更换破损的玻璃？Spotswood 很容易和其他条纹花纹混淆。请给现有玻璃拍照，最好放个东西作参照，下单前发给我们。花纹配对比速度更重要，因为一排相同的玻璃里有一块不一样会很明显。
装在门上、门旁或离地面不到 500mm 的玻璃必须是安全玻璃。
More about this glass, delivery & FAQs
Spotswood 玻璃多少钱
无需报价——在上面选厚度，输入宽和长，价格随即更新。
- 6mm Spotswood — 每平方米 $200
- 4mm Spotswood — 每平方米 $233
- 5mm Spotswood — 每平方米 $270
- 钢化每平方米 $30 起，抛光边每延米 $10 起
- 每块最低按 0.5 m² 计价。价格已含墨尔本市区和 Geelong 内城区的送货。
选多厚？
4mm 是浴室和厕所窗户以及大多数现有木框玻璃的标准厚度——如果要配老房子里破损的玻璃，拆下来的通常就是 4mm。
5mm 适合较大的窗户和门侧窗。 6mm 用于门、楼梯隔断和柜门，容易被碰撞的地方用这个厚度。
更换破损的玻璃
Spotswood 很容易和其他条纹花纹混淆。请把现有玻璃放在素色背景前拍照，放一把尺子或一枚硬币作参照，并量 玻璃 ——而不是窗框开口。我们的指南 如何辨认老房子里的压花玻璃 和 如何测量要更换的窗户玻璃 对这两点都有讲解。
常见问题
线条应该朝哪个方向？
由您决定，我们按要求切割。竖线让玻璃显得更高，横线显得更宽。一排玻璃要保持方向一致——方向不一致是最常见的后悔点。
哪面朝外？
窗户上有花纹的一面通常朝里，这样光滑的外侧不易积雨水、也好清洁。请看 压花玻璃哪面朝外.
需要钢化吗？
如果装在门上、门旁、淋浴间，或玻璃离地面不到 500mm，需要——AS 1288 要求使用安全玻璃。请看 澳洲标准何时要求使用安全玻璃.
隐私效果怎么样？
不错，但不如 Satinlite，它是我们三种花纹中遮挡效果最好的。Spotswood 的条纹是把形状打散，而不是均匀地模糊。
我们不提供结构或工程方面的建议 ——下单前请与安装师傅或专业人士确认厚度和玻璃类型。
Compare patterned and frosted glass
Tap a photo to see that glass and its prices. If you are matching an old window, compare the texture and how much you can see through it, then check the thickness at the edge of the old pane.
Cathedral
Soft wavy texture. Medium privacy. 4mm.
Spotswood
Fine linear texture. Good privacy. 4–6mm.
Satinlite
Fine satin texture. High privacy. 4–6mm.
Narrowline 长虹玻璃
Vertical ribs. Blurs shapes, lets light through.
Acid etched (frosted)
Smooth, even white. Highest privacy.
Where Spotswood is used
- Bathroom and toilet windows: 4mm or 5mm, toughened if it is low or near the bath.
- Internal doors and sidelights: 5mm or 6mm, toughened.
- Shower screens and partitions in older homes: 6mm toughened.
- Cabinet fronts: 4mm or 5mm with polished edges.
Spotswood, Satinlite or Cathedral?
All three are patterned glasses that let light through and blur the view. Spotswood has a fine directional line, so it has a "grain" like timber: decide whether the lines run up and down or side to side. Satinlite is a finer, more even texture and gives slightly more privacy. Cathedral has a softer wavy ripple and shows more of what is behind it. If you are replacing one pane in a set, match the existing pattern rather than choosing the most private one.
Measuring a replacement pane
Measure the glass inside the frame in millimetres, width first, and allow 2–3mm clearance on each side. Check the old pane's thickness at the edge: most older Spotswood windows are 4mm or 5mm. Tell us the line direction in the order notes if it matters.
Spotswood 4mm and 6mm can be delivered to Melbourne, inner Geelong and metropolitan Sydney. 5mm is Melbourne and Geelong only.
Is Spotswood glass safety glass?
Only when it is toughened. Choose toughening on the product page for doors, bathrooms and anything within 500mm of the floor.
Can Spotswood be used in a shower?
Yes, as 6mm toughened glass in a framed or semi-frameless screen. Put the smoother face on the wet side so it is easier to clean.